Important safety information
Handle AURA Strap 2 for Apple Watch with care. It contains sensitive electronic components, including batteries, and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don't use damaged AURA Strap 2.
AURA Strap 2, bioimpedance analysis feature and AURA App is not for medical use.
Compatibility
AURA Strap 2 works only with Apple Watch Series 3 or later. It may be used with a 38/40/41 mm or 42/44/45/49 mm version of Apple Watch, depending on your AURA Strap 2 (check it on the package). Update to the latest iOS and watchOS.
Coin cell element
AURA Strap 2 contains a CR1632 lithium 3V coin battery for getting power. The battery may need to be replaced during the life of the product. You can change it by yourself with an included guitar pick or credit card or ask for help at authorized service.
Water resistance
AURA Strap is water resistant. The device will not be affected by high moisture or immersion in water up to 50 cm / 20 inches. But the device may suffer from direct exposure to high-pressure water stream. We do not recommend swimming or using the device in the shower.
IMPORTANT: Do not allow moisture to enter inside the case during battery replacement.
Choking hazard
AURA Strap 2 may present a choking hazard or cause other injuries to small children. Keep them away from small children.
Medical device interference
AURA Strap 2 contains components and radios that emit electromagnetic fields. These electromagnetic fields may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical equipment and AURA Strap 2. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using AURA Strap 2 if you suspect they are interfering with your pacemaker, defibrillator, or any other medical equipment.
WARNING: Strictly prohibited to use body composition and hydration level monitoring feature if you're pregnant or using pacemaker or defibrillator.
Skin irritation
AURA Strap 2 can lead to skin infections or irritation if not properly cleaned. Clean AURA Strap 2 regularly with a soft lint-free cloth. If a skin problem develops, discontinue use. If the problem persists, consult a physician.
Electrostatic shock
When using AURA Strap 2 in areas where the air is dehydrated, it is easy to build up static electricity and possible for your wrist to receive a small electrostatic discharge from AURA Strap 2. To minimize the risk of electrostatic discharge, avoid using AURA Strap 2 in arid environments, or touch a grounded unpainted metal object before putting AURA Strap 2 on.
Important handling information
Clean AURA Strap 2 with a soft, dry, lint-free cloth. Do not use liquids or cleaning products.
Support
For support and troubleshooting information, visit help.auradevices.io or reach us by email support@auradevices.io
Apple Watch® and watchOS® are trademarks of Apple Inc.
Regulatory Compliance Information
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this product not authorized by AURA Devices could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.
This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
Responsible party (contact for FCC matters only):
AURA Devices Inc.
1013 Centre Road, Suite 403-B
Wilmington, DE 19805
USA